Skip to content
S.B. Electronics Printed circuit boards · since 2000, home page

Resources · FAQ

PCB FAQs, answered from the factory floor.

40 questions buyers and engineers ask before, during and after an order — cost, files, lead time, finishes, assembly, testing and payment. Short, direct answers, with every figure taken from our published capability sheet.
Questions
40 in 6 topics
Minimum order
1 board
Express prototypes
24 h
Engineer reply
Within 24 hours on working days
§ 01 / 06 · ORD06 questions

Ordering & quotes

What a board costs, which jobs the instant quote prices on the spot, and how an order moves from upload to the first panel.

01.01

How much does a PCB cost in India?

A PCB’s price depends on board area, layer count, quantity, material, copper weight, surface finish and lead time. For rigid single- and double-sided boards, our instant PCB quote prices it live as you set size, quantity, thickness, copper and dispatch time. Multilayer, flex and assembly jobs are priced after an engineer reviews your data. GST is added as applicable.

01.02

Is there a minimum order quantity for PCBs?

No. There is no minimum order quantity: we build from a single prototype board upwards, and the instant quote accepts 1 to 100,000 boards per line. Unit price falls as quantity rises, because CAM, tooling and set-up are shared across more boards, so a prototype run followed by a production order is the usual pattern.

01.03

Which jobs can I price with the instant quote?

Rigid single- and double-sided boards: 10 mm to 600 mm per side, 1 to 100,000 boards per line, dispatched in 3, 5, 7 or 10 working days. Multilayer, flex, impedance-controlled, assembly, stencils, component sourcing and large-volume work are quoted by an engineer — send your files through the contact page and we aim to reply within 24 hours on working days.

01.04

How do I get a quote for multilayer, flex or assembly work?

Send your Gerbers and drill files with the quantity, material, thickness, finish and required date through our contact page, or email them to sbelectronics01@gmail.com. For assembly, add the BOM and centroid file. An engineer checks the data for manufacturability and aims to reply within 24 hours on working days with a reviewed price and lead time.

01.05

How do I order PCBs online?

Price your board in the instant quote, upload the zipped Gerbers, then register or sign in and check out with your shipping and billing addresses. Once payment is confirmed, our CAM engineers review the files and raise any query before production starts. You can follow each stage in the customer portal up to dispatch.

SeeHow to order, step by step
01.06

Is there a PCB manufacturer in Gujarat?

Yes. S.B. Electronics has manufactured printed circuit boards in the G.I.D.C. Electronics Estate, Sector-25, Gandhinagar, since 2000. Fabrication, assembly and stencil cutting happen in-house on one site, and boards go out by courier across India. The sales desk is open Mon–Sat, 9:00 AM – 7:00 PM IST.

SeeAbout S.B. Electronics
FIG. 02 · Two ways to a price

Online · priced live

Instant quote

Boards
Rigid single- and double-sided boards
Size
10 mm to 600 mm per side
Quantity
1 to 100,000 boards per line
Lead time
Dispatch in 3, 5, 7 or 10 working days
Price
Shown live as you change options; fixed when you order
Files
Zipped Gerbers, uploaded with the quote

Engineer · reviewed

Request a quote

Boards
Multilayer, flex, impedance-controlled, assembly, stencils, component sourcing and large-volume work
Size
Minimum 10 × 10 mm; maximum 500 × 600 mm (larger on request)
Quantity
No minimum order quantity — one prototype board upwards
Lead time
Quoted per job after engineering review
Price
Reviewed price and date, aimed within 24 hours on working days
Files
Gerbers and drill; BOM and centroid for assembly
§ 02 / 06 · DAT05 questionsTopics

Files & design data

What to send, in which format, and what our CAM engineers check before a single panel is drilled.

02.01

What files are needed to manufacture a PCB?

For bare boards: Gerber RS-274X (or X2) plus Excellon drill files; ODB++ accepted. Include one Gerber for each copper, solder-mask, legend and paste layer, plus the board outline. For assembly, add a BOM (CSV / Excel, with manufacturer part numbers) and centroid / pick-and-place data. Zip everything into one archive and upload it with your quote.

SeeHow to order
02.02

What is a Gerber file?

A Gerber file is the standard vector image of one PCB layer — copper, solder mask, legend, paste or outline. RS-274X embeds its own aperture definitions, and X2 adds attributes such as each file’s function. KiCad, Altium, EAGLE and OrCAD all export Gerbers, together with the Excellon drill files that locate every hole.

SeePCB glossary
02.03

How do you check my files before production?

Every order starts with a CAM and DFM review: engineers check your Gerbers, drill and fab notes for manufacturability and prepare the production tooling. Track and space, drill sizes, annular rings, mask openings and the outline are compared with our process limits, and anything outside them comes back to you as a query before work begins.

SeeFull capability sheet
02.04

What should the fabrication drawing or readme include?

State the layer count, base material and Tg, finished thickness, copper weight, surface finish, mask and legend colours, quantity and the IPC class you need. Add impedance targets with the stack-up, panel requirements and special features such as V-scoring or countersinks. Clear notes replace assumptions and save a full query cycle.

02.05

Do I need to panelise my own design?

No. Send a single board and we panelise it for production and, when it goes on to assembly, for the line. Panel options: V-score, tab-routing (mouse bites) or a combination; rails, fiducials and tooling holes. If your assembler needs a specific array, send their panel drawing or set it up in the instant quote’s panel designer.

§ 03 / 06 · FAB09 questionsTopics

PCB fabrication

Board types, materials, finishes and the limits of our process. Every figure below is read from the same capability sheet as the rest of the site.

03.01

What is a PTH PCB?

A PTH (plated-through-hole) PCB has holes whose walls are copper-plated, so each hole electrically joins the copper on both sides, or on every layer. Tracks can change layer through vias, and through-hole leads get a stronger solder joint. A NON-PTH board has bare holes and relies on soldered leads or jumpers to link its sides.

SeeDouble-sided PTH and NON-PTH
03.02

Which PCB types do you make in-house?

Everything is made in our Gandhinagar plant: single-sided, double-sided PTH and NON-PTH, multilayer in 4, 6, 8, 10 and 12 layers, flexible circuits boards. The same site runs PCB assembly, laser-cut SMT stencils and component sourcing, so one order can cover the bare board, the stencil and the finished assembly.

03.03

HASL or ENIG: which surface finish should I choose?

Choose HASL or lead-free HASL for cost-sensitive boards with larger pads and through-hole parts. Choose ENIG when the board carries fine-pitch ICs or BGAs, needs flat pads, or will be stored before assembly. OSP is a flat, low-cost lead-free option for boards assembled soon after delivery. We offer all four; only leaded HASL falls outside RoHS.

03.04

What are your minimum track, space and drill sizes?

Track and space: 6 mil / 6 mil standard; 4 mil / 4 mil fine-line. Minimum drill: 0.3 mm mechanical; 0.2 mm for fine-pitch designs. Annular ring: 0.15 mm minimum for drilled holes (design guideline). Use the standard values wherever the layout allows: they keep yield high and price low.

SeeFull capability sheet
03.05

Which board thicknesses and copper weights can you build?

Finished thickness: 0.4 mm to 3.2 mm standard; 0.2 mm for thin rigid designs. Copper: 1 oz (35 µm) and 2 oz (70 µm) standard; 3 oz (105 µm) and heavier on request. Choose 2 oz or heavier for high-current power boards, and flag thin boards early, because thickness drives the stack-up.

03.06

How many layers can you build, and do you control impedance?

We build 1 to 12 layers, with multilayer in 4, 6, 8, 10 and 12 layers. Impedance: controlled impedance, ±10% tolerance, with stack-up design support. Send the impedance targets and reference layers with your files; we propose a stack-up and confirm trace widths with you before lamination. Impedance-controlled jobs are quoted by an engineer rather than online.

SeeMultilayer PCB
03.07

Which base materials do you use?

FR-4 (Tg 150 °C / Tg 170 °C), FR-2, CEM-1, CEM-3, polyimide (flex). FR-4 at Tg 150 °C suits most boards; choose Tg 170 °C for thicker multilayers, repeated lead-free reflow or products that run hot. Thermal vias pull heat away from LED lighting and power parts, and polyimide is the base of every flex circuit.

03.08

Which solder mask and legend colours are available?

Solder mask: Green, Red, Blue, Black, White, Yellow. Legend: White, Yellow, Black. Green is the default: it has the widest process window and the best contrast for optical inspection. White is common on LED boards for its reflectance, and black is mainly cosmetic — it makes tracks harder to inspect by eye.

03.09

What can you build in flexible circuits?

We build single- and double-sided polyimide flex with polyimide coverlay, on 12.5, 25 and 50 µm polyimide film: 0.1 mm to 0.3 mm finished flex thickness. Track and space: 4 mil / 4 mil in the flex area. FR-4 and polyimide stiffeners; PSA backing on request. Keep vias out of bend zones; tracks should cross the bend at right angles.

SeeFlexible circuits
FIG. 03 · Pad finishes in section
F1Sn-Pb solder

HASL (leaded)

Pad surface
Domed, uneven
Lead-free
No
Best for
Through-hole and larger pads at the lowest cost
F2Lead-free solder

Lead-free HASL

Pad surface
Domed, uneven
Lead-free
Yes
Best for
General RoHS boards with larger pads
F3Ni + immersion Au

ENIG

Pad surface
Flat
Lead-free
Yes
Best for
Fine-pitch ICs, BGAs and boards stored before assembly
F4Organic film

OSP

Pad surface
Flat
Lead-free
Yes
Best for
SMT boards assembled soon after delivery

The ruled line is a straight edge across the pad: solder-levelled finishes dome up to meet it, ENIG and OSP lie flat beneath it — which is why fine-pitch parts and BGAs call for one of the two.

§ 04 / 06 · ASM07 questionsTopics

PCB assembly, stencils & sourcing

From a laser-cut stencil for your own line to fully sourced, inspected assemblies built in the same plant as the bare boards.

04.01

What is turnkey versus consigned PCB assembly?

In full turnkey assembly we buy every component, build and inspect the board, and ship finished assemblies. In consigned assembly you supply the parts as a kit and we assemble them. Partial turnkey sits between: you send the critical or long-lead parts and we source the rest. All three models run on the same line.

SeePCB assembly
04.02

Which components and board sizes can you assemble?

We assemble SMT, through-hole (THT) and mixed technology boards, soldered by reflow, wave and selective / hand soldering. Placement goes down to 0201 (imperial) passives. Fine pitch: 0.4 mm minimum BGA ball pitch; QFN, QFP and fine-pitch ICs. Assembly board size is 50 × 50 mm to 510 × 460 mm; smaller boards are assembled in panels.

04.03

How are assembled boards inspected?

Inspection: AOI at every stage; X-ray for BGA; functional test on request. Workmanship is judged to IPC-A-610 Class 2 standard; Class 3 on request. Reflow: 8-zone lead-free reflow; leaded profiles on request. If you need a functional test, tell us at the quote stage so we can agree the procedure, the fixture and who supplies it before the first build.

04.04

How should I prepare a BOM for assembly?

List every line with reference designators, quantity, value, package, manufacturer and manufacturer part number, and flag do-not-fit positions. Approved alternates help when stock is short. Send it as CSV or Excel with the centroid file. Before any part is ordered, we check the BOM for availability, lifecycle and cost, and propose cross-references for approval.

SeeComponent sourcing
04.05

What is an SMT stencil, and which thickness do I need?

An SMT stencil is a thin metal foil with apertures that print solder paste onto the pads before placement. Ours are SUS304 stainless steel, laser-cut directly from your Gerber paste-layer data, in 0.08 mm to 0.2 mm foil. Fine-pitch parts need a thinner foil and large power pads a thicker one; a stepped stencil gives both on one foil.

SeeSMT stencils
04.06

Framed or frameless stencil: which should I order?

Framed stencils are tensioned in a rigid frame for production printers and long runs, where registration matters most. Frameless foils cost less, store flat and fit a universal holder, so they suit prototypes and short runs. We supply framed, frameless (foil), stepped and electroformed stencils, with electro-polished apertures for clean paste release.

04.07

Can you source components, including obsolete parts?

Yes, within strict limits. Parts come from authorised distributors and manufacturers only — no grey-market or broker stock. Lot and date-code traceability on every part. When a part is end-of-life, NRND or out of stock, we propose a drop-in cross-reference for your approval rather than buying unknown stock. Sourced parts are kitted for assembly on our line.

SeeComponent sourcing
§ 05 / 06 · QA05 questionsTopics

Quality & testing

Our certification, the IPC standards we build and inspect to, and how every board is tested before it is packed.

05.01

Is S.B. Electronics ISO 9001 certified?

Yes. S.B. Electronics is certified to ISO 9001:2015 for its quality management system. Bare boards are built and inspected to IPC-A-600 and IPC-6012, and assemblies to IPC-A-610. For regulated sectors we build to IPC Class 3 and your drawing; your product’s sector certification stays with you.

SeeQuality and inspection
05.02

Is every PCB electrically tested?

Yes. Bare boards get 100% electrical test — flying probe or bed-of-nails fixture — plus AOI, checking every net for opens and shorts. Flying probe needs no fixture and suits prototypes; a bed-of-nails fixture tests large volumes faster. An IPC-D-356 netlist from your CAD tool lets the test compare against your design intent.

05.03

What is the difference between IPC Class 2 and Class 3?

Class 2 covers dedicated-service electronics — industrial, telecom and most commercial products — where long life matters but a brief interruption is tolerable. Class 3 is for products that must work continuously, with tighter limits on plating, annular ring and defects, and more inspection evidence. Assembly workmanship: IPC-A-610 Class 2 standard; Class 3 on request.

05.04

How is quality checked while the boards are made?

Inspection is built into the line, not left to the end. CAM engineers check your data before tooling is made. Every etched layer is scanned against the design data for opens, shorts and nicks. After routing, 100% flying-probe or bed-of-nails test verifies every net for opens and shorts. Final inspection checks every board against IPC-A-600 before packing.

SeeQuality and inspection
05.05

Do you build PCBs for automotive, medical and railway products?

Yes. Automotive, medical electronics, railways, aerospace and defence are among the 11 industries we serve. For these we build to IPC Class 3 and your drawing; your product’s sector certification stays with you. Tell us the standard your product must meet, and we agree inspection and documentation before the first build.

SeeIndustries we serve
FIG. 04 · Where every board is checked
  1. G1CAM & DFM reviewStage 01 / 13 · CAM

    Engineers check your Gerbers, drill and fab notes for manufacturability and prepare the production tooling.

  2. G2Automated optical inspectionStage 07 / 13 · AOI

    Every etched layer is scanned against the design data for opens, shorts and nicks.

  3. G3Electrical testStage 12 / 13 · E-T

    100% flying-probe or bed-of-nails test verifies every net for opens and shorts.

  4. G4Final inspectionStage 13 / 13 · FQC

    Final QC against IPC-A-600 acceptance criteria, then protective packing and dispatch.

§ 06 / 06 · DLV08 questionsTopics

Delivery, payment & policies

Lead times and express builds, shipping, how to pay, and what happens if you need to cancel or something arrives wrong.

06.01

What is the lead time for PCBs?

Rigid single- and double-sided boards ordered online dispatch in 3, 5, 7 or 10 working days; you choose the option at checkout and the price reflects it. For urgent work there is 24-hour express for urgent simple prototypes. Multilayer, flex and assembly lead times are quoted per job after engineering review, because they depend on layers, materials and parts.

06.02

Can you make a PCB in 24 hours?

Yes, for urgent simple prototypes — typically standard material, thickness and finish with no special processes. Call or WhatsApp +91 96241 70703 before sending the files, so we can confirm the slot against the day’s production. If the design is too complex for 24 hours, we tell you the fastest date we can commit to.

06.03

Do you deliver across India and overseas?

Yes. Boards are dispatched by courier from Gandhinagar to any address in India, with a courier docket number to track each parcel. International delivery is available on request: tell us the destination country when you ask for a quote, and we confirm freight cost and transit time before you order.

06.04

How do I pay for a PCB order?

Online orders are paid at checkout by card or net banking through the HDFC Bank payment gateway, or by UPI. NEFT, RTGS and IMPS bank transfers are accepted against a proforma invoice. Prices are in Indian rupees, GST is added as applicable, and production starts once payment is confirmed.

06.05

Will I get a GST invoice?

Yes. Every order is billed on a GST tax invoice in the name and GSTIN of the billing entity you enter at checkout, so a registered business can claim input tax credit. Billing and shipping addresses can differ, which suits companies that buy from a head office and receive boards at a factory.

06.06

Can I cancel or change an order?

You can cancel within 2 hours of ordering, before manufacturing starts, for a full refund. Once manufacturing has started the order cannot be cancelled, because the boards are made to your design. If you need a change, contact us straight away with the order number and we will tell you what is still possible. Full terms: refund and cancellation policy.

06.07

What if boards arrive damaged or defective?

Report it within the claim period in our refund policy, with the order number and photos or a short video of the problem. Our quality team verifies the claim; confirmed defects are replaced or refunded, and we arrange and pay for the return shipping. Errors in the supplied files are not covered, which is why unclear data is queried first.

SeeRefund and cancellation policy
06.08

How do I track my order?

Sign in to the customer portal to see each order’s current stage, from file review through production to dispatch, and the courier docket number once the boards ship. For anything else, call or WhatsApp +91 96241 70703 with your order number, Mon–Sat, 9:00 AM – 7:00 PM IST.

FIG. 05 · When boards ship
  1. MondayDay 0StartApproved
  2. Tuesday+124 h24 h express
  3. Wednesday+2
  4. Thursday+33d3 days
  5. Friday+4
  6. Saturday+55d5 days
  7. SundayClosed
  8. Monday+6
  9. Tuesday+77d7 days
  10. Wednesday+8
  11. Thursday+9
  12. Friday+1010d10 days
  13. Saturday+11
  14. SundayClosed

Instant-quote dispatchExpress, by arrangement+n = working days after approval

Multilayer, flex, assemblyQuoted per job after engineering review

Example: files approved and payment confirmed on a Monday. Sundays are not counted, and courier transit comes on top. You pick the dispatch option at checkout and the price follows it; express builds are confirmed by phone against the day’s production.

REFQuick reference

The figures behind these answers.

Every number on this page is read from one capability sheet, so it says the same here as on the product pages. Tolerances, notes and the full tables are on the capabilities page.
Capability summary · Rev. November 2026
Layer count1 to 12 layersMultilayer: 4, 6, 8, 10 and 12 layers
Board thickness0.4 mm to 3.2 mm standard; 0.2 mm for thin rigid designs
Copper weight1 oz (35 µm) and 2 oz (70 µm) standard; 3 oz (105 µm) and heavier on request
Track / space6 mil / 6 mil standard; 4 mil / 4 mil fine-line
Minimum drill0.3 mm mechanical; 0.2 mm for fine-pitch designs
Surface finishHASL (leaded), Lead-free HASL, ENIG, OSP
Board sizeMinimum 10 × 10 mm; maximum 500 × 600 mm (larger on request)
Instant quoteRigid single- and double-sided boards, 10 mm to 600 mm per side1 to 100,000 boards per line
Online dispatch3, 5, 7 or 10 working days24-hour express for urgent simple prototypes
AssemblySMT, through-hole (THT) and mixed technology0201 (imperial) passives; 0.4 mm minimum BGA ball pitch; QFN, QFP and fine-pitch ICs
SMT stencilsSUS304 stainless steel, 0.08 mm to 0.2 mm foil
Flexible circuits0.1 mm to 0.3 mm finished flex thickness12.5, 25 and 50 µm polyimide film
Engineer replyWithin 24 hours on working days
CancellationWithin 2 hours of ordering, before manufacturing starts

Not on the list?

Ask the question. An engineer answers it.

Send your question with your Gerbers or drawing and we aim to reply within 24 hours on working days. Rigid one- and two-layer boards can be priced right now in the instant quote.