Skip to content
S.B. Electronics Printed circuit boards · since 2000, home page

Industries · Since 2000

PCBs for the industries we serve

An LED driver, a battery-management board and a railway signalling card are all printed circuit boards, but they fail for different reasons. Pick your sector to see the boards it uses, the problems we build against and a starting specification.

SBE · INDUSTRIES · PANEL 3 × 3ROUTED · MOUSE-BITE TABS01 LED02 AUTO · EV03 IND04 SOLAR · BESS05 MED06 TEL07 IoT08 A&D · CL 309 RAIL
FIG. 01Nine industries on one production panel. Each board opens its sector's page.
Sectors served
11
Layers
1–12
Build class
IPC 2 · 3 on request
Quality system
ISO 9001:2015

01Overview

Which industries use PCBs?

Almost every industry that uses electricity uses printed circuit boards. What changes from one sector to the next is not the process but the priorities.

Lighting wants a heat path and a low price per board. Vehicles want boards that survive thermal cycling and vibration. Industrial controls want isolation and quiet ground planes; telecom wants controlled impedance; rail and aerospace want Class 3 workmanship and a traceable lot.

Each industry page below sets out those priorities in engineering terms — board types, materials, finishes, failure modes — and ends with a specification you can paste into a drawing.

02Industries

Find your sector and its requirements

Each page covers the boards a sector uses, the engineering problems we build against, typical applications, a recommended specification and the standards context.
  1. IND-01Thermal path

    LED lighting

    Single-sided FR-4 and CEM LED and driver boards built in volume, with white mask, thermal-via arrays under the LED pads and lead-free finishes.

    1–2 L · FR-4 / CEM

    PCBs for LED lighting
  2. IND-02Thermal cycling

    Automotive and EV

    EV chargers, battery management, lighting and body electronics on high-Tg FR-4, with heavy copper on power paths and Class 3 on request. Tier suppliers' own requirements go on the drawing.

    2–6 L · high Tg

    PCBs for Automotive and EV
  3. IND-03EMC · isolation

    Industrial electronics

    PLCs, drives, instruments and meters: double-sided PTH and multilayer FR-4 with ground planes, controlled impedance for fieldbus, and mixed SMT and through-hole assembly.

    2–6 L PTH

    PCBs for Industrial electronics
  4. IND-04Current · voltage

    Renewable energy

    Solar inverters, charge controllers, battery storage and BMS. Boards carry high current and high DC voltage outdoors for many years, so heavy copper and generous isolation come first.

    2–6 L · heavy Cu

    PCBs for Renewable energy
  5. IND-05Reliability

    Medical electronics

    Patient monitors, diagnostic instruments and laboratory equipment on fine-pitch multilayer boards with ENIG, built to Class 3 on request. Your device's regulatory approval stays with you.

    4–8 L · fine pitch

    PCBs for Medical electronics
  6. IND-06Signal integrity

    Telecommunication

    Network, radio and infrastructure electronics. Multilayer stack-ups with controlled impedance to ±10%, agreed before fabrication, keep high-speed links clean.

    4–12 L · impedance

    PCBs for Telecommunication
  7. IND-07Cost · density

    Consumer electronics and IoT

    Covers 2 sectors: Consumer electronics · IoT

    Appliances, wearables, smart-home and connected devices: cost-driven double-sided and four-layer boards, fine-pitch ENIG for radio modules, flexible circuits where the product folds.

    2–4 L rigid · 1–2 L flex

    PCBs for Consumer electronics and IoT
  8. IND-08High reliability

    Aerospace and defence

    Covers 2 sectors: Aerospace · Defence & security

    Ground equipment, instrumentation and high-reliability subsystems built to IPC Class 3 and your drawing, with lot traceability. Programme approvals stay with you; we build to what they flow down.

    4–12 L · Class 3 on request

    PCBs for Aerospace and defence
  9. IND-09Vibration · lifetime

    Railways

    Signalling, traction-control and on-board electronics that face vibration, temperature swings and decades of service. Class 3 on request and lot traceability; product approvals stay with you.

    2–8 L

    PCBs for Railways

03Compare

What changes from one industry to the next?

The typical construction, the concern that drives the design, the usual finish and the IPC class each sector specifies. Your drawing always overrides the typical.

Swipe for every column

Typical PCB requirements by industry
IndustryTypical constructionDesign driverFinishIPC class
LED lighting1–2 L · FR-4 / CEMThermal pathLF-HASL · OSPClass 2
Automotive and EV2–6 L · high TgThermal cyclingENIGClass 2 · 3
Industrial electronics2–6 L PTHEMC · isolationLF-HASL · ENIGClass 2
Renewable energy2–6 L · heavy CuCurrent · voltageLF-HASL · ENIGClass 2
Medical electronics4–8 L · fine pitchReliabilityENIGClass 2 · 3
Telecommunication4–12 L · impedanceSignal integrityENIGClass 2
Consumer electronics and IoT2–4 L rigid · 1–2 L flexCost · densityENIG · OSPClass 2
Aerospace and defence4–12 L · Class 3 on requestHigh reliabilityENIGClass 3
Railways2–8 LVibration · lifetimeENIG · LF-HASLClass 2 · 3

04Our part, your part

We build to IPC Class 3 and your drawing. Your sector certification stays with you.

Regulated sectors approve products, not bare boards. Your IATF, ISO 13485, AS9100 or rail approval belongs to your company and your product. What we bring is a board built exactly to the requirements you flow down:

  • An ISO 9001:2015 certified quality management system
  • IPC Class 2 as standard; Class 3 on request, stated on the drawing
  • AOI and a 100% electrical test of every net, then final inspection to IPC-A-600
  • A job card that ties each board to its production lot
  • Components from authorised distributors with lot and date-code traceability
Years manufacturing PCBsIn the G.I.D.C. Electronics Estate since 2000
25+
Customers servedOEMs, design houses and start-ups
2,100+
On-time deliveryPrototype and production orders
99.2%
Express prototypesFor urgent simple builds
24 h

Not on the list? If your product uses a single-sided, double-sided, multilayer or flexible board, we can build it. Send the drawing and tell us where it will be used.

Ask about your sector

Industries

Tell us where the board will live. We will tell you how to build it.

Send Gerbers with a line about the product and its environment. An engineer replies with a reviewed quote and the construction we recommend; one- and two-layer boards can be priced online right now.